Energy Bill Concerns

Our new UltraV Series will heat or cool when outdoor temperatures reach -22 degree F. Multi-zone units run at 100% capacity at 5 degree F. Single zones maintain 100% capacity at 0 degree F. This makes these units well suited to installations requiring year round conditioning, both residential and light commercial.

• Multiple modes: auto, turbo, sleep, fan only
• 24 Hour timer
• Intelligent pre-heat
• Automatic louver swing
• Smartphone compatible
• Easy to repair & maintain - high wall heads disassemble in 1 minute

Advanced inverter technology means the room will reach the preset temperature quickly and that the temperature will be constant without the fluctuations that occur in other systems due to on-off cycling. Energy usage is kept to a minimum as units run at low frequency most of the time. However, when required the unit ramps up automatically to reach and maintain the comfort level.

The DVH air handler is visually unobtrusive and it’s also so quiet you’ll forget it’s even there. Fan speed and mode can be selected so the air flow provides the comfort needed without being disruptive. All models feature three fan speeds.

• Auto Defrost—Standard on all models,
• Auto Restart—Reverts to the last setting following a power failure
• Smartphone Compatible—Optional 7800-208 Smartphone Control Kit available separately
• Auto Operation—Automatically adjusts to maintain a constant temperature humidity level
• Auto Swing—Continually adjusts air flow direction for a gentle, breeze-like effect

Our “DV” Series, rated up to 21.5 SEER, offers economical zone control because only the room or area being used is conditioned and inverter technology matches the compressor speed to the room’s changing temperature requirements.

A variable-speed motor that control temperature and humidity to keep you comfortable. The HCG-V1P is the right choice for high-humidity environments and homeowners who prioritize energy savings.

• Enhanced tube-and-fin coil design featuring MHT™ Technology

The Comfort-Aire® HRG18S1P inverter heat pump offers premium comfort at a price point designed to fit your budget. With ratings up to 20 SEER and 10 HSPF. It offers superior performance and incredibly quiet operation** - less than half the sound you typically hear from a 14 SEER single-stage heat pump. Other benefits include enhanced dehumidification and five operating modes to set your preferred balance of comfort and energy efficiency. Broad compatibility and long-term reliability can even help you save on replacement costs.

• Clean-sweep defrost provides a more thorough defrost, reducing the number of cycles during heating operation
• Raised coil prevents debris from impeding airflow and helps prevent ice build-up
• • Full metal louvered construction to protect the coil

Designed to deliver dependable comfort, the HMG-F1P Permanent Split Capacitor (PSC) motor delivers consistent airflow throughout the seasons. For the best performance, pairthis air handler with a matched Comfort-Aire® heat pump or air conditioner.

• Enhanced tube-and-fin coil design featuring MHT™ Technology
• Baked polyester paint finished over galvanized steel for maximum durability

The Comfort-Aire® HRG15-S1R* delivers increased energy savings with efficiencies of up to 16.9 SEER2 and 9 HSPF2 when paired with a matched furnace or air handler. To help you get the most out of your HVAC system.

• Internally protected against high temperature motor overload conditions
• Raised base pan with ports allows for excellent water and debris drainage
• All units ETL and ETLC approved and AHRI listed
• Advanced design defrost system featuring a smart logic for power consumption savings

An upgraded constant torque blower motor uses up to30% less energy than the HMG-X1P. Pair this air handler with a matched Comfort-Aire® heat pump or air conditioner for enhanced energy savings all year long.

• Enhanced tube-and-fin coil design featuring MHT™ Technology
• Built-in indoor time delay for increased efficiency and comfort

The HRG14-S1P* delivers significant energy savings and efficiencies of up to 16 SEER and 9.0 HSPF, when paired with a matched Comfort-Aire® variablespeed or constant-torque furnace or air handler. Your Comfort-Aire® dealer can recommend the right pairing for your home.

• Internally protected against high temperature motor overload conditions
• Individual metal louvered panels remove easily for coil cleaning and service
• Factory installed high and low pressure switches
• Quiet Shift™ capable to reduce noise during defrost

A variable-speed motor that control temperature and humidity to keep you comfortable. The HCG-V1P is the right choice for high-humidity environments and homeowners who prioritize energy savings.

• Enhanced tube-and-fin coil design featuring MHT™ Technology

With efficiencies of up to 16 SEER, the RSG16-S1M exceeds federal energy-efficiency standards. Beyond lowering your monthly energy bill, this unit can operate at lower speed with longer cycles—allowing for more even temperatures, quieter operation and better humidity control.

• All units ETL and ETLC approved and AHRI listed
• Enhanced aluminum fins and copper tubing for higher efficiency and capacity

Designed to deliver dependable comfort, the HMG-F1P Permanent Split Capacitor (PSC) motor delivers consistent airflow throughout the seasons. For the best performance, pairthis air handler with a matched Comfort-Aire® heat pump or air conditioner.

• Enhanced tube-and-fin coil design featuring MHT™ Technology
• Baked polyester paint finished over galvanized steel for maximum durability

The RSG16-S1P* delivers significant energy savings and efficiencies of at least 16 SEER when paired with and efficiencies of at least 16 SEER when paired with a matched Comfort-Aire® variable-speed or constanttorque furnace or air handler. Your Comfort-Aire® dealer can recommend the right pairing for your home.

• Internally protected against high temperature motor overload conditions
• Baked polyester paint finished over galvanized steel for maximum durability
• Factory installed high pressure switch

An upgraded constant torque blower motor uses up to30% less energy than the HMG-X1P. Pair this air handler with a matched Comfort-Aire® heat pump or air conditioner for enhanced energy savings all year long.

• Enhanced tube-and-fin coil design featuring MHT™ Technology
• Built-in indoor time delay for increased efficiency and comfort

Offering efficiencies beginning at 14 SEER, the RSG14-S1P* is the easy way to replace an old unit and gain efficiency and reliability

• Baked polyester paint finished over galvanized steel for maximum durability
• Baked polyester paint finished over galvanized steel for maximum durability
• Enhanced tube-and-fin coil design featuring MHT™ Technology

An upgraded constant torque blower motor uses up to30% less energy than the HMG-X1P. Pair this air handler with a matched Comfort-Aire® heat pump or air conditioner for enhanced energy savings all year long.

• Enhanced tube-and-fin coil design featuring MHT™ Technology
• Built-in indoor time delay for increased efficiency and comfort

Enjoy season after season of worry-free operation. The RSG13-S1M** delivers the highest level of reliability to ensure you’ll be greeted by a comfortable environment every time you come home

• Baked polyester paint finished over galvanized steel for maximum durability
• High-quality condenser coil with copper tubing and enhanced louvered fin for maximum heat transfer
• All units ETL and ETLC approved and AHRI certified

If you live in an area that experiences consistently mild temperatures, the TPRG-R heat pump is a perfect solution for both heating and cooling.

The TARG-P electric air conditioner is ideal if you have all-electric heating and cooling in your home.

Our flagship furnace sports stainless steel primary and secondary heat exchangers, as well as a true ECM blower motor for the ultimate in durability and comfort. Superior technology works well with all standard 24VAC thermostats while the 33” compact height fits almost all installations

• 409 stainless steel primary heat exchanger with crimped non-welded construction
• Self diagnostics saves last 10 fault codes regardless of power interruption
• Easily removable slide-out blower design

With efficiencies of up to 16 SEER, the RSG16-S1M exceeds federal energy-efficiency standards. Beyond lowering your monthly energy bill, this unit can operate at lower speed with longer cycles—allowing for more even temperatures, quieter operation and better humidity control.

• All units ETL and ETLC approved and AHRI listed
• Enhanced aluminum fins and copper tubing for higher efficiency and capacity

ECM variable speed blower motor provides even temperatures and improved indoor air quality. Two stage design operates at low speed most of the time to save energy, automatically ramps up to second stage when there’s demand. All units A/C ready

• Control board retains last five (5) fault codes with push button memory recall, regardless of power interruption
• Control features 120 volt electronic air cleaner and humidifier terminals
• Two stage thermostat is recommended when installed with two stage cooling unit.

The RSG16-S1P* delivers significant energy savings and efficiencies of at least 16 SEER when paired with and efficiencies of at least 16 SEER when paired with a matched Comfort-Aire® variable-speed or constanttorque furnace or air handler. Your Comfort-Aire® dealer can recommend the right pairing for your home.

• Internally protected against high temperature motor overload conditions
• Baked polyester paint finished over galvanized steel for maximum durability
• Factory installed high pressure switch

Efficient and reliable heat exchangers, hot surface igniter, integrated furnace control with on-board diagnostics. Equipped with constant surface igniter, integrated furnace control with on-board diagnostics. Equipped with constant torque motor. Low profile cabinet is ideal for replacements. All units are A/C ready

• Aluminized steel primary heat exchanger with crimped non-welded construction
• Self diagnostics save last 10 fault codes regardless of power interruption

Offering efficiencies beginning at 14 SEER, the RSG14-S1P* is the easy way to replace an old unit and gain efficiency and reliability

• Baked polyester paint finished over galvanized steel for maximum durability
• Baked polyester paint finished over galvanized steel for maximum durability
• Enhanced tube-and-fin coil design featuring MHT™ Technology

Our non-condensing gas furnace features hot surface igniter, in-shot burner and crimped no-weld aluminized clam shell heat exchanger. Multi-speed ECM blower delivers warm air quietly. Low profile cabinet fits in even tight spaces. Integrated control board includes diagnostic lights. LP conversion kits are available.

• Self diagnostics saving last 10 fault codes regardlesss of power interruption
• Aluminized steel tapered crimped non-welded clam shell heat exchanger design

Enjoy season after season of worry-free operation. The RSG13-S1M** delivers the highest level of reliability to ensure you’ll be greeted by a comfortable environment every time you come home

• Baked polyester paint finished over galvanized steel for maximum durability
• High-quality condenser coil with copper tubing and enhanced louvered fin for maximum heat transfer
• All units ETL and ETLC approved and AHRI certified

Our flagship furnace sports stainless steel primary and secondary heat exchangers, as well as a true ECM blower motor for the ultimate in durability and comfort. Superior technology works well with all standard 24VAC thermostats while the 33” compact height fits almost all installations

• 409 stainless steel primary heat exchanger with crimped non-welded construction
• Self diagnostics saves last 10 fault codes regardless of power interruption
• Easily removable slide-out blower design

The Comfort-Aire® HRG18S1P inverter heat pump offers premium comfort at a price point designed to fit your budget. With ratings up to 20 SEER and 10 HSPF. It offers superior performance and incredibly quiet operation** - less than half the sound you typically hear from a 14 SEER single-stage heat pump. Other benefits include enhanced dehumidification and five operating modes to set your preferred balance of comfort and energy efficiency. Broad compatibility and long-term reliability can even help you save on replacement costs.

• Clean-sweep defrost provides a more thorough defrost, reducing the number of cycles during heating operation
• Raised coil prevents debris from impeding airflow and helps prevent ice build-up
• • Full metal louvered construction to protect the coil

ECM variable speed blower motor provides even temperatures and improved indoor air quality. Two stage design operates at low speed most of the time to save energy, automatically ramps up to second stage when there’s demand. All units A/C ready

• Control board retains last five (5) fault codes with push button memory recall, regardless of power interruption
• Control features 120 volt electronic air cleaner and humidifier terminals
• Two stage thermostat is recommended when installed with two stage cooling unit.

The Comfort-Aire® HRG15-S1R* delivers increased energy savings with efficiencies of up to 16.9 SEER2 and 9 HSPF2 when paired with a matched furnace or air handler. To help you get the most out of your HVAC system.

• Internally protected against high temperature motor overload conditions
• Raised base pan with ports allows for excellent water and debris drainage
• All units ETL and ETLC approved and AHRI listed
• Advanced design defrost system featuring a smart logic for power consumption savings

Efficient and reliable heat exchangers, hot surface igniter, integrated furnace control with on-board diagnostics. Equipped with constant surface igniter, integrated furnace control with on-board diagnostics. Equipped with constant torque motor. Low profile cabinet is ideal for replacements. All units are A/C ready

• Aluminized steel primary heat exchanger with crimped non-welded construction
• Self diagnostics save last 10 fault codes regardless of power interruption

The HRG14-S1P* delivers significant energy savings and efficiencies of up to 16 SEER and 9.0 HSPF, when paired with a matched Comfort-Aire® variablespeed or constant-torque furnace or air handler. Your Comfort-Aire® dealer can recommend the right pairing for your home.

• Internally protected against high temperature motor overload conditions
• Individual metal louvered panels remove easily for coil cleaning and service
• Factory installed high and low pressure switches
• Quiet Shift™ capable to reduce noise during defrost

Our non-condensing gas furnace features hot surface igniter, in-shot burner and crimped no-weld aluminized clam shell heat exchanger. Multi-speed ECM blower delivers warm air quietly. Low profile cabinet fits in even tight spaces. Integrated control board includes diagnostic lights. LP conversion kits are available.

• Self diagnostics saving last 10 fault codes regardlesss of power interruption
• Aluminized steel tapered crimped non-welded clam shell heat exchanger design

The HRG14-S1P* delivers significant energy savings and efficiencies of up to 16 SEER and 9.0 HSPF, when paired with a matched Comfort-Aire® variablespeed or constant-torque furnace or air handler. Your Comfort-Aire® dealer can recommend the right pairing for your home.

• Internally protected against high temperature motor overload conditions
• Individual metal louvered panels remove easily for coil cleaning and service
• Factory installed high and low pressure switches
• Quiet Shift™ capable to reduce noise during defrost

Our flagship furnace sports stainless steel primary and secondary heat exchangers, as well as a true ECM blower motor for the ultimate in durability and comfort. Superior technology works well with all standard 24VAC thermostats while the 33” compact height fits almost all installations

• 409 stainless steel primary heat exchanger with crimped non-welded construction
• Self diagnostics saves last 10 fault codes regardless of power interruption
• Easily removable slide-out blower design

ECM variable speed blower motor provides even temperatures and improved indoor air quality. Two stage design operates at low speed most of the time to save energy, automatically ramps up to second stage when there’s demand. All units A/C ready

• Control board retains last five (5) fault codes with push button memory recall, regardless of power interruption
• Control features 120 volt electronic air cleaner and humidifier terminals
• Two stage thermostat is recommended when installed with two stage cooling unit.

Efficient and reliable heat exchangers, hot surface igniter, integrated furnace control with on-board diagnostics. Equipped with constant surface igniter, integrated furnace control with on-board diagnostics. Equipped with constant torque motor. Low profile cabinet is ideal for replacements. All units are A/C ready

• Aluminized steel primary heat exchanger with crimped non-welded construction
• Self diagnostics save last 10 fault codes regardless of power interruption

Our non-condensing gas furnace features hot surface igniter, in-shot burner and crimped no-weld aluminized clam shell heat exchanger. Multi-speed ECM blower delivers warm air quietly. Low profile cabinet fits in even tight spaces. Integrated control board includes diagnostic lights. LP conversion kits are available.

• Self diagnostics saving last 10 fault codes regardlesss of power interruption
• Aluminized steel tapered crimped non-welded clam shell heat exchanger design

If your home has a natural gas connection, the compact and durable TGRG-R gas/electric packaged unit could be the right choice for you.

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Heavy-duty 14 gauge steel with a long lasting, high temperature ceramic fiber combustion chamber
• High quality Beckett™ Flame Retention NX Burner for efficient combustion
• Dynamically balanced blower wheel and resilient motor mounts for smooth and quiet operation
• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow

With efficiencies of up to 16 SEER, the RSG16-S1M exceeds federal energy-efficiency standards. Beyond lowering your monthly energy bill, this unit can operate at lower speed with longer cycles—allowing for more even temperatures, quieter operation and better humidity control.

• All units ETL and ETLC approved and AHRI listed
• Enhanced aluminum fins and copper tubing for higher efficiency and capacity

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow
• High quality Beckett™ Flame Retention AFG Burner for efficient combustion

The RSG16-S1P* delivers significant energy savings and efficiencies of at least 16 SEER when paired with and efficiencies of at least 16 SEER when paired with a matched Comfort-Aire® variable-speed or constanttorque furnace or air handler. Your Comfort-Aire® dealer can recommend the right pairing for your home.

• Internally protected against high temperature motor overload conditions
• Baked polyester paint finished over galvanized steel for maximum durability
• Factory installed high pressure switch

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow
• High quality Beckett™ Flame Retention AFG Burner for efficient combustion

Offering efficiencies beginning at 14 SEER, the RSG14-S1P* is the easy way to replace an old unit and gain efficiency and reliability

• Baked polyester paint finished over galvanized steel for maximum durability
• Baked polyester paint finished over galvanized steel for maximum durability
• Enhanced tube-and-fin coil design featuring MHT™ Technology

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow
• High quality Beckett™ Flame Retention AFG Burner for efficient combustion

Enjoy season after season of worry-free operation. The RSG13-S1M** delivers the highest level of reliability to ensure you’ll be greeted by a comfortable environment every time you come home

• Baked polyester paint finished over galvanized steel for maximum durability
• High-quality condenser coil with copper tubing and enhanced louvered fin for maximum heat transfer
• All units ETL and ETLC approved and AHRI certified

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Heavy-duty 14 gauge steel with a long lasting, high temperature ceramic fiber combustion chamber
• High quality Beckett™ Flame Retention NX Burner for efficient combustion
• Dynamically balanced blower wheel and resilient motor mounts for smooth and quiet operation
• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow

The Comfort-Aire® HRG18S1P inverter heat pump offers premium comfort at a price point designed to fit your budget. With ratings up to 20 SEER and 10 HSPF. It offers superior performance and incredibly quiet operation** - less than half the sound you typically hear from a 14 SEER single-stage heat pump. Other benefits include enhanced dehumidification and five operating modes to set your preferred balance of comfort and energy efficiency. Broad compatibility and long-term reliability can even help you save on replacement costs.

• Clean-sweep defrost provides a more thorough defrost, reducing the number of cycles during heating operation
• Raised coil prevents debris from impeding airflow and helps prevent ice build-up
• • Full metal louvered construction to protect the coil

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow
• High quality Beckett™ Flame Retention AFG Burner for efficient combustion

The Comfort-Aire® HRG15-S1R* delivers increased energy savings with efficiencies of up to 16.9 SEER2 and 9 HSPF2 when paired with a matched furnace or air handler. To help you get the most out of your HVAC system.

• Internally protected against high temperature motor overload conditions
• Raised base pan with ports allows for excellent water and debris drainage
• All units ETL and ETLC approved and AHRI listed
• Advanced design defrost system featuring a smart logic for power consumption savings

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow
• High quality Beckett™ Flame Retention AFG Burner for efficient combustion

The HRG14-S1P* delivers significant energy savings and efficiencies of up to 16 SEER and 9.0 HSPF, when paired with a matched Comfort-Aire® variablespeed or constant-torque furnace or air handler. Your Comfort-Aire® dealer can recommend the right pairing for your home.

• Internally protected against high temperature motor overload conditions
• Individual metal louvered panels remove easily for coil cleaning and service
• Factory installed high and low pressure switches
• Quiet Shift™ capable to reduce noise during defrost

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Heavy-duty 14 gauge steel with a long lasting, high temperature ceramic fiber combustion chamber
• High quality Beckett™ Flame Retention NX Burner for efficient combustion
• Dynamically balanced blower wheel and resilient motor mounts for smooth and quiet operation
• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow

Inside every Comfort-Aire® oil furnace, you’ll find Clean Performance Technology, solid-state ignition and a CleanCut pump for long-lasting operation. These furnaces are equipped with a Becket NX Burner and the Genisys™ advanced control system that can customize your furnace’s operation and maximize your home comfort

• Cofigurations • Upflow / Highboy • Basement / Lowboy • Horizontal / Counterflow
• High quality Beckett™ Flame Retention AFG Burner for efficient combustion